How To Repair Vinyl Plank Flooring - Best Tips
Vinyl plank flooring (LVP) is a cost-effective solution for achieving the aesthetic of natural wood floors. How to repair vinyl plank flooring? The best way to fully repair vinyl plank flooring is removing the damaged section and replacing it with new vinyl flooring planks.
Identify & Mark The Damaged Area
- Locate the damaged vinyl flooring planks or section and mark it for removal. If necessary, use a straight edge or ruler to ensure precise lines.
Prepare The Surrounding Vinyl Flooring Planks
- Carefully remove the baseboard or molding near the damaged area to access the planks.
- Gently lift the edges of the surrounding planks to expose the damaged piece.
Remove Damaged Vinyl Planks
- Use a utility knife to cut along the marked lines, separating the damaged planks from the surrounding ones.
- Lift and remove the damaged plank, taking care not to damage adjacent planks.
Clean The Subfloor
- Clean any adhesive or debris from the subfloor where the damaged plank was removed.
- Ensure a smooth and level surface for the new plank.
Measure & Cut The Replacement Plank
- Measure the dimensions of the removed plank accurately.
- Use these measurements to cut a new plank of the same style and color, ensuring a seamless match.
Install New Vinyl Plank Flooring
- Apply adhesive to the back of the new plank, following the manufacturer’s instructions.
- Carefully press the new vinyl planks into place, aligning them with the surrounding planks for a snug fit.
Secure the Replacement Vinyl Planks
- Use a roller to firmly press down on the replacement plank, ensuring proper adhesion to the subfloor.
- If using a click-lock system, ensure the planks click securely into place.
Replace Baseboard or Molding
- Once the new plank is securely in place, reattach the baseboard or molding to cover the expansion gap, if applicable.
Allow For Adhesive Drying
- Follow the adhesive drying time recommended by the manufacturer before walking on the repaired area.
Fixing Common Issues With Vinyl Plank Flooring
End Plank Separation
Planks may separate due to factors such as humidity or physical shifting, particularly with click-lock floors. To remedy this issue:
- Vacuum the gap to remove debris for a tight seam.
- Use a suction cup and rubber mallet to scoot the board into place.
- Repeat the process, ensuring the last gap is concealed behind the baseboard.
Side Plank Separation
Gaps along the sides caused by humidity, temperature changes, or improper installation can be easily fixed:
- Choose a vinyl flooring putty matching your floor color.
- Clean and vacuum the gap, allowing it to dry overnight.
- Apply putty using the nozzle, remove excess with a plastic putty knife, and wipe clean with a damp sponge.
- Follow putty drying instructions for a seamless finish.
Planks may pop up, posing a tripping hazard. If failed glue causes the issue:
- Carefully remove the popped-up plank and clean the subfloor.
- Apply vinyl plank flooring adhesive and press the plank down with a roller.
- Use a weight on the board while the adhesive dries.
Cupping, where plank edges rise, can be addressed by understanding the cause:
- For humidity or temperature-related cupping, use a humidifier or curtains.
- If moisture damage is the issue, consult a professional for potential plank replacement.
Can You Fix Gouges In Vinyl Plank Flooring?
If you have extra planks, it’s probably easier to replace the plank than to patch the gouge
Address minor scratches or deep white lines with these steps:
- Clean the plank thoroughly with soap and water.
- Use a furniture repair marker or pen matching your flooring color.
- For noticeable scratches on a few planks, consider new vinyl plank flooring installation
Vinyl Flooring Chicago
Consider trying to kick the misaligned plank into place. Put on shoes with good grip, face away from the gap, and stand with one foot on a neighboring plank. Give a forward kick to the plank that needs adjustment. This action can often be enough to snugly close the gap.